Where performance meets flexibility - benefit from the widest range of accessories in the market

Optical systems/accessories, electrochemistry solutions, electrical sample characterization, environmental control options, software modules, temperature control, acoustic and vibration isolation solutions and more. JPK provides you with the right accessories to control your sample conditions and to perform successful experiments.


FluidFM® ADD-ON from Cytosurge

NOW AVAILABLE: Fully integrated Cytosurge FluidFM solution for advanced single cell, spectroscopy and nanomanipulation experiments

OT-AFM Combi-System/ ConnectorStage™

Pow­er­ful Op­ti­cal Tweez­ers & AFM Com­bi­na­tion for force mea­sure­ments in 2D and 3D from 500fN to 10nN

CellHesion® module

The CellHesion® module combines the capabilities of the BioAFM with precise adhesion force measurements.

BioMaterials Workstation BioMAT™

Completely integrated system comprising upright optical microscope and AFM.

DirectOverlay™ 2 software module

Perfect optical integration enables direct correlation of AFM and optical data


Remote control and monitoring of complex and long-term experiments.


Allows customized experimental procedures, including control of external equipment

Advanced Force Spectroscopy module

For advanced force measurement experiments from single protein unfolding, DNA stretching to probing of cells and tissue.

NanoLithography/NanoManipulation module

Software module for NanoWizard® systems.

CoverslipHolder with electrical sample connection

For electrical measurements such as Conductive AFM or STM on a coverslip in combination with high NA optics

Electrical sample connection module

Accommodates electrical conductive samples such as AFM metal stubs by magnetic fixation or transparent samples such as ITO coated glass coverslips.

Kelvin Probe Microscopy (KPM) module

Option for nanoscale mapping of surface potential distribution

Conductive AFM (CAFM) module

For high-performance conductivity experiments

Conductive AFM module - enclosed volume

For high-performance conductivity experiments under controlled environmental conditions

TC-CAFM module

For low-conducting samples

Scanning Tunneling Microscopy (STM) module

Tip-bias wire holder with integrated current amplifier circuit and automatic samp-le grounding

High Voltage Sample Bias Amplifier

For biasing a sample, e.g., in electro-optical experiments or in Piezoresponse Force Microscopy (PFM) and piezo hysteresis mapping


For most sensitive experiment control, e.g. force fishing experiments

Head-up stage

For tall samples up to 140mm height


For sample property changes under external mechanical load up to 200N

StretchingStage for higher forces

Enables sample property changes under external mechanical load up to 5000N or 10000N

Motorized precision stage

Offers automatic motion control for precise positioning of the sample relative to optical axis and AFM probe.

Standard stage

Offers fine motion control for precise positioning of the AFM tip relative to the sample.

Sample holder for large samples

The holder can accommodate larger samples such as microchips or wafers and is equipped with spring clips which can be varied.

SideView cantilever holder

For use in combination with inverted optical microscopes to observe the cantilever region from the side.

Cantilever holder with electrical tip connection

For use in air with a fixed cantilever spring and an electrical tip connection

BioCell™ for AFM

Coverslip based fluid cell for Live Cell imaging and single molecule fluorescence with temperature control and perfusion


  • closed liquid cell with standard coverslip bottom
  • high-N.A. immersion optics possible
  • autoclavable


  • for Live Cell imaging
  • accomodates 35 mm Petri dishes even with glass bottom


The perfect solution for smallest volume experiments in a hermetically sealed environment, two versions available for volumes <150µl and <60µl.


Designed for polymer science and phase separation studies from ambient up to 300°C with a resolution of 0.1°C and minimized drift in all dimensions.

Heating Cooling Module - HCM™

Designed for heating and cooling experiments in gas or liquids with minimized drift in all dimensions.


Designed for AFM experiments in air or liquids from 0°C up to 100°C with minimized drift in all dimensions – HCS™ follows the same design criteria as HTHS™.


JPK offers specialized cryostages together with NanoWizard® systems for cooling applications down to -120°C.


  • works with transparent or non-transparent substrates
  • temp. range from ambient to 60°C
  • max. 1350µL liquid volume

HCS™ with electrochemistry cell

Designed for electrochemistry AFM experiments with controlled heating and cooling of the sample.


Potentiostats from Bruker and third parties, e.g. from IPS, for electrochemistry applications together with NanoWizard systems.

JPK Acoustic Enclosure

Approved for high performance applications: acoustic hood from JPK for utmost stability and isolation, with temperature control option.

JPK base for acoustic enclosure

Approved for high performance applications: base frame with top plate from JPK for utmost stability.

TopViewOptics™ module

Optical system to view tip and sample during experiments on opaque samples


The optical system for non transparent samples or substrates such as HOPG, mica, ceramics, metall etc.

TopViewOptics™ for use with inverted optical microscopes

The optical system for use with inverted optical microscopes or the JPK BioMAT™.

Raman reflector kit

Raman reflector kit for Tip-Enhanced Raman Scattering (upright-TERS) on opaque samples.

Upright Fluorescence Microscope (UFM) Kit

The Upright Fluorescence Microscope (UFM) Kit enables the combined use of AFM and upright fluorescence zoom microscopy.

FluidFM® ADD-ON from Cytosurge

This technology enables easy handling of liquid volumes at the femtoliter scale by providing a range of hollow cantilever designs.

JPK sample holder for small samples

Adaptor for standard sample holder. Holds magnetically fixed AFM metal stubs.

JPK cable anchorage pillow

Heavy weight pillow for fixation of cables to reduce noise coupling.

JPK cantilever changing tool

Probe loading station for convenient cantilever exchange.

JPK bio-compatible glue

For cantilever or sample fixation, easy removable and bio-compatible (2x 4ml).


JPK FluidicsModule™ with up to 8 different liquids such as buffer solutions

Cantilever shop

For all kind of applications and experimental needs

Scanning Thermal Microscopy module - SThM

From Bruker Anasys, for thermal conductivity experiments